Main

 
PROJECT6
PROJECT# 6   PYGMY MUMMIES
CLICK ON PICTURES TO VIEW IMAGES BIGGER
PICTURE 1 & 2 ARE THE HEAD WITH BACK BONE(THE HEADS FIT ON THE WIRE SO THEIR INTERCHANGIBLE). PICTURE 3 IS BACK BONE & THE BREAST BONE (NOTICE THE HOLES DRILLED IN THE TUBES). 4 HANDS & FEET. I USED VINYL TUBING AND MULTI-PURPOSE WIRE TO MAKE EVERYTHING. USING THE WIRE IN THE TUBE GIVE YOU ALOT OF FLEXIBLY. YOU CAN GET THIS STUFF AT HOME DEPOT.THEY HAVE DIFFERENT SIZES.
THE NEXT 4 PICTURE ARE THE RIB CAGE. PICTURE 1 THE  BARE WIRE IS THE START OF THE TOP RIB.IT CONNECTS FROM THE SHOULDER TO THE BREAST BONE THAN BACK TO THE OTHER SHOULDER. TO MAKE CONNECTION I DRILL A HOLE THROUGH THE TUBING THAN I RUN THE WIRE THROUGH THE HOLE AND THEN I WRAP THE WIRE AROUND THE TUBING.ONCE YOU START CONNECTING EVERYTHING THE FRAME WILL GET STRONGER. PICTURE 2 SHOW THE SECOND RIB FRON THE BOTTOM. I RAN THE WIRE THROUGH BOTH BACK BONE & BREAST BONE TO GET THE SHAPE. AFTER YOU`RE HAPPY WITH THE SHAPE TAKE A MEASUREMENT OF THE WIRE FROM THE BACK BONE TO THE BREAST BONE. YOU CAN JUST TAKE SOME TUBE AND HOLD IT AGAINST THE WIRE.ONCE YOU HAVE THAT CUT TWO PIECES OF TUBE THAT LENGTH. ONE FOR EACH SIDE. PICTURE 3 IS THE SAME AS 2 JUST A DIFFERENT ANGLE. THE PIECE OF BLACK TAPE IS ON THE NECK. 4 IS THE FINISH RIB CAGE FRAME.
THE NEXT 4 PICTURES ARE 1 FINISHED FRAME.2 I USED WIRE TO BUILD OUT THE ARM & LEG MUSCLES. THAN I COVER THEM WITH PAPIER MACHE. YOU CAN USE WHAT EVER WORKS FOR YOU TO BUILD UP MUSCLE MASS.(GREAT STUFF) 3& 4 JUST SOME PICTURES TO GIVE YOU SOME IDEAS. I HAVE TO DETAIL AND PAINT THIS GUY.
THE NEXT 4 PICTURES 1 SIZED VIEW. 2 LEGS. 3 FRONT. 4 RIB CAGE. I HAD A HARD TIME FINDING PICTURES OF THESE GUY.SO I TOOK PICTURES WITH MY CAMERA OF THE MOVIE. NOT THE BEST PICTURES BUT THEY WORKED.I HAVE TO MAKE HIM A SPEAR FOR HIS LEFT HAND. I PLAN ON HANGING HIM OFF MY SECOND FLOOR  PORCH OVER THE MAIN STAIRS.
THE LAST THREE PICTURES ARE SIZE AND BACK VIEW OF RIB CAGE. HE`S 31 INCHES TALL AND 26 INCHES WIDE FROM ELBOW TO ELBOW. YOU MAY HAVE TO PUT MORE WIRE OR HEAVIER WIRE INTO THE BACKBONE FOR SURPORT.AND IF THE HAND IS GOING TO HOLD SOMETHING YOU MAY NEED TO ADD HEAVIER WIRE THERE TOO. I HOPE THIS GIVES YOU SOME IDEAS.
THESE ARE PICTURES OF THE FIRST MUMMIE. I GAVE HIM A SPEAR AND LITE UP HIS EYES WITH 2 ORANGE LEDS. I FILLED HIS HEAD WITH FOAM SO THE LEDS WOULD LIGHT UP THE WHOLE EYE OPENNING. IF YOU GET THE RIGHT ANGLE THE LED LOOKS LIKE THE CENTER OF THE EYE.
THIS IS THE SECOND MUMMIE.HE`S BIGGER THAN THE FIRST AND WILL HAVE A KNIFE IN ONE OF HIS HANDS. I USED TWO YELLOW LEDS FOR HIS EYES. I GAVE HIM A TONGUE MADE OUT OF FOAM. I STILL HAVE TO WORK ON THESE GUYS.

 

page created with Easy Designer