|
|
|
||||||||
|
Millwrights Local No.1402
|
||||||
 |
||||||
|
OUR TOOL LIST
All of Local 1402’s millwrights endeavor to supply and carry the following tools:
Tool box(es) with Lock(s)
Open end wrench set, Box end wrench set
3/8 inch drive socket wrench set, 1/2 inch drive socket wrench set
Adjustable-end wrenches, 6, 8, 10, or 12 inch
Hex key (allen) wrench set
Slip-joint pliers, Channellock pliers, Vice-grip pliers, Snap ring plier set
Pair of metal cutting snips
Pocket scale, 6 inch, Pocket scribe with magnet
Pocket tape, 8, 10, 12 or 16 foot
Chalk box, Plumb bob
Standard screwdriver set, Phillips screwdriver set
Ball pein hammer(s)
Punch and chisel assortment, Center punch assortment, Line up pin assortment
Pinch (pry) bar
Dividers, 6 inch, Calipers, 6 inch outside, Calipers, 6 inch inside
Combination square, 12 inch w/center head and protractor
Micrometer, 0 to 1 inch, outside
Thickness (feeler) gauge set
Level, 12 inch Starrett “98” or equivalent
Universal dial test indicator w/attachments, Inspection mirror
Hacksaw frame (optional)
Note: Wrench sizes shall not exceed 1-1/4 inch opening
All metric tools are supplied by the employer
|
||||||
| page created with Easy Designer |